Y position
英 [waɪ pəˈzɪʃn]
美 [waɪ pəˈzɪʃn]
网络 位置; Y位置; Y轴坐标
双语例句
- Using the cup option, or cursor position, in tput, you can move the cursor to any X or Y coordinates in the device's rows and columns.
通过在tput中使用cup选项，或光标位置，您可以在设备的各行和各列中将光标移动到任意X或Y坐标。 - When you move the mouse over the rectangle, the X and Y positions of the mouse are shown and change as the mouse moves; clicking the mouse on the rectangle records the position of the click.
将鼠标移动到矩形上面时，会显示鼠标的X和Y位置，并且这两个显示的值会随着鼠标的移动而改变，在矩形上单击鼠标会记录下单击的位置。 - True multitouch capability would allow for an X and Y coordinate reading of each finger position.
真正的多触点功能将允许读取每个手指位置的X和Y坐标。 - Using the moveTo ( x, y) method, the pen can be moved to a new position.
通过使用moveTo（x，y）方法，可以将画笔移动到一个新的位置。 - Each series line should graphically show the position of each point in the series with reference to the X and Y reference lines.
每个级数线都应该以图形形式显示出引用X和Y引用线的那些级数中的每个点的位置。 - Moves slices out from a pie chart; it actually takes some offset on slice's x and y position when a user hovers over an element with the mouse.
此动作将切块移出饼图；当用户将鼠标悬停于一个元素上方时，此动作实际上是使切块略微偏离其x和y轴位置。 - You can also use the lineTo ( x, y) method to add a subpath to the current path, and position the pen at the specified position.
还可以使用lineTo（x，y）方法添加一个子路径到当前路径，并将画笔定位在一个指定的位置。 - My career path is important to me, and Ive been very impressed with what Ive learned about this company and believe that this position in particular is a great fit for my skills in X, Y, and Z. Do you agree?
我的职业生涯路线是非常重要的，而且对贵公司的了解给我留下了深刻的印象，我相信这个职位非常适合我，因为它所要求的X，Y，Z技能我都具备。 - Once that was done, the scales could be read in the X and Y directions and a very precise position could be assigned to the star.
一旦完成，就可以以x和y的指向阅读，这颗行星就可以非常精确的被定位。 - Locates the tail of the board in the X and Y position ( centre of the stringer aligns with the line on the tail stop). The tail of the board butts up with the wooden tail stop.
用于将板材固定在X和Y轴位置上（支撑架中点与尾部止点上的线对齐）板材尾部顶住木头尾部止点。 - Determines how much the X, Y and Z position is increased ( or decreased) for each instance.
决定每一复制实例层之间递增的或者递减的在X，Y和Z轴上的偏移量。 - Black and white cameras acquire an optical intensity signal as a function of X position and Y position.
黑白相机捕捉光的明暗度信号就好比是X坐标和Y坐标。 - The running of axes X and Y is driven by servo motor and ball screw shaft and the punching position is controlled by double axes numerical control system.
轴及Y轴运行由伺服电机及滚珠丝杠驱动，由双轴数控系统控制冲孔位置。 - A positioning signal is received by a low-pass filter ( 103) that produces filtered position data for driving the X-and Y-axis translation stages.
定位信号由低通滤波器（103）接收，低通滤波器（103）产生滤波后的位置数据以驱动X与Y轴平移台座。 - The position of the probe ( in X, Y and Z) is displayed on the computer and is used in building up C scan images on the screen as the probe is moved.
计算机里会显示探针的具体位置（X，Y和Z轴），并且随着探针的移动，在计算机屏幕上显示C扫描图像。 - If you think that f of x, y, z, t will be the temperature at a point in space at position x, y, z and at time t, then this tells you how temperature changes over time.
想象一下f就是，在空间处，在时间t处的温度，这个方程告诉我们，在给定点处温度随时间的变化。 - Unless otherwise approved, gauges and fixtures will be built in car position with X, Y, and Z start points stamped into base.
除非有批准，否则产品在检具的位置心汽车坐标系为准，X、Y，和Z基准值需印在底座上。 - Through combination of multi-beam coherent light for interference exposure with, the obtained patterns are independent of the longitudinal position z of substrate and they appear a periodic relation with position x and position y in the interference field.
用多束相干光适当组合干涉曝光，得到的图形与基片在干涉场内的纵向位置z无关，与x、y位置呈周期关系，光的相干长度对应传统光学光刻的焦深。 - The angle of incidence to be less than 70 ° was measured by using four light screens respectively at X and Y axis direction. The velocity, angle of incidence and coordinate of position are gained after firing.
在X和Y方向分别采用四个成固定角度的光幕来实现入射角度的测量，一次射击可得到弹丸的速度、速度方向上的空间角和着靶位置坐标。 - Under the automatic way the system shifts welding gun position and track in Y axis according to the supersonic focus sensor, the welding machine turns down the workers labor strength, increases welding automation degree.
在自动工作方式下：系统根据超声波传感器的信号，实现焊接Y轴跟踪：并使用涡流传感器进行Z轴跟踪，自动完成焊接任务。可大大减低工人的劳动强度，提高焊接自动化程度。 - The measured object of the three degree-of-freedom measurement mechanism is moving along X, Y, Z three coordinate axis. That is only to trace and measure the position of the motion part.
三自由度测量臂的测量对象为沿X、Y、Z三个坐标轴的平动，即仅对运动部件进行位置跟踪与测量。 - Compensation and correction of the X Y stage position for the large scale ultra precision artwork generator
大幅面超精密图形发生器X－Y工作台位置补偿校正 - The paper describes adopting three stepping motors which have been carefully divided to drive working table moving along X 、 Y directions to make fixed position of the workpiece correctly, so that the automatic measurement is to be realized.
描述了采用三个步进电机经过细分后驱动工作台沿X、Y方向移动来准确定位工件，实现了自动化测量。 - Also, the voltage relate with the X/ Y coordinate are read by using Waiting for Interrupt Mode and Auto X/ Y Position Conversion Mode, then the control of touch screen is complete.
并利用S3C2410的等待中断模式和自动XY坐标转换工作模式，读出与XY坐标有关的电压值，完成对触摸屏的控制。 - X axis and Y axis electric moving stages are driven to track object based on its position which is calculated by improved 3 frame difference algorithm.
通过改进的三帧差分法计算运动目标的位置，控制X、Y轴电动位移台跟踪目标。 - The mathematical model of camera imaging is studied, and a calibration method for 3D machine vision, which combines height calibration with position calibration, is introduced.
研究了摄像机透镜成像的数学模型，提出了基于非共面点的摄像机自动标定方法，给出了高度和相位之间的映射关系，以及坐标（x，y）的标定方法。 - It has been obtained that under the initial position and under the general condition, this mechanism possesses three moving DOF along the directions of x, y, z axes, namely after a shift happened under the initial position, this mechanism still possesses three moving DOF.
得出该机构在初始位置下和在一般情况时，机构有沿x、y、z轴方向的三个移动自由度，即初始位置下发生移动后，该机构还有3个移动自由度。 - The scheme makes use of strict collimation of the beams, full solid angle detection of the reaction products with a x y position sensitive Δ E E counter telescope, mixing trigger and pileup rejection to carry out the measurement of angular distribution under low beam intensity.
采取次级束的严格准直、反应产物的两维位置灵敏全立体角探测、抗脉冲堆积和混合触发电子学线路等一系列措施，成功地实现了低流强条件下反应角分布的测量。